Horizontal Autoclave
1. Ambica Autoclave will be in sturdy construction using plates of appropriate thickness which prevents buckling under vacuum or bulging due to pressure.
2.Fully automatic by means of PLC base controls, which operate pneumatically actuated solenoid valves. Provision of four different cycles and programmes.
1. Standard Cycle Operating Pressure -1 Bar to + 4 Bar
- Heat up- ster hold (121oC) - exhaust
- Heat up- ster hold (134°C)- exhaust
- The technique uses the method of gravity air removal to ensure uniforms steam distribution and penetration.
- Steam trap equipped with air vent ensure maximum air removal. Useful for sterilization of glass containers i.e. ampoules, vials, glass bottles etc. It is also useful for Sterilization of glass wares, utensils, vessels, instruments, rubber articles linen etc.
2. HP HV Cycle 3 pre ster vacuum pulses-heat up-ster hold- exhaust-post ster-vacuum pulsing for drying. This technique uses near 100% air removal from sterilization clamber v, which results in better temperature uniformity in the chamber because of the absence of air pockets i.e. cold spots. This technique increases the penetration of steam in porous products from which removal of air is difficult.
Vacuum drying at the end of sterilizing hold period ensures drying of the material which has been sterilized it is useful for vials and eye drops entering the class I area and processing drums, garments, fabrics, drying rubbers stoppers vessels machine parts, liquids in bottles and PVC pouches etc.
3. Leak Test Cycle for periodic testing of door integrity and pipeline connections & detecting leakage ampules.
4. Another HP HV Cycle with post vacuum pulses can be provided, if required for special purpose.
|
